发表文章

• Perylenediimide Derivatives Based on a Dendritic Oligothiophene Core as Electron Acceptor for Use in Polymer Solar Cells.

  Yi, Maoheng;Yi, Jinduo;Wang, Junkai;Wang, Lilei;Gao, Wei;Lin, Yi;Luo, Qun;Tan, Hongwei;Ma, Chang-Qi*;Wang, Hongyu*.

• Enhancing Stability of Inverted Perovskite Solar Cells via Buried Interface Modification Using In-Situ Crosslinked Thiol-Ene Polymer

  Guorong Zhou, Changzeng Ding,* Xin Luo, Lianping Zhang, Zhen Wang, Bo Xu,*and Chang-Qi Ma*

  Adv. Energy Sustainability Res. 2025, 6, 250002722

• Large A rea Gravure P rinted AgNWs E lectrode on Water/Oxygen Barrier Substrate for Long T erm Stable Large A rea Flexible Organic Solar Cells

  Hao Wang, Yaqin Pan, Yunfei Han,* Zhuo Chen, Tianyu Liu,Lianping Zhang, Qun Luo,* and Chang-Qi Ma*

  Chin. J. Chem. 202 4 , 4 2 , 478 48404

• Simultaneously enhancing efficiencyand thermo-/UV-stability of organicsolar cells by regulating thenanomorphology of the polymerblend by an acrylated fullerenederivative

  Haitao Song , Yaqian Dong , Zesheng Zhang , Jin Fang , Chao Yue, Yongzhen Yang , Chao Liu, Qing Guo, Hua Wang, Qun Luo, Wei-Shi Lie, Lingpeng Yan , Chang-Qi Ma , ChristophJ. Brabec

  Chemical Engineering Journal2025,503, 15869423

• Multi，site P assivation of ZnO Metal Oxides v ia Biomolecules for Efficient a nd Highly Stable Organic Solar Cells

  Irfan Ismail, Maria Khalil, Xiaomei Gao, Xingze Chen, Muhammad Jawad, Rong Huang, Zhiyun Li, Emmanuel Acheampong Tsiwah, Wei-shi Li, Qun Luo,* and Chang-Qi Ma*

  Chin. J. Chem. 202 4 , 4 2 , 1582 159205

• Selective Dispersion of Large-Diameter Semiconducting Carbon Nanotubes by Functionalized Conjugated Dendritic Oligothiophenes for Use in Printed Thin Film Transistors.

  Gao, Wei;Xu, Wenya;Ye, Jun;Liu, Tingting;Wang, Junkai;Tan, Hongwei;Lin, Yi;Tange, Masayoshi;Sun, Dongfeng;Wu, Liangzhuan;Okazaki, Toshiya;Yang, Yingjun;Zhang, Zhiyong;Zhao, Jianwen*;Cui, Zheng;Ma, Chang-Qi*.

• Enriching bottom acceptors for high-performance inkjet-printed organicsolar cells

  Xingze Chen, Lifeng Sang, Yuanyuan Jiang , Yiyu Chen, Qing Zhang , RongHuang, Fenggi Guo, Guanghao Lu , Xiaozhang Zhu, Qi Chen ,Chang-Qi Ma , Qun Luo

  Chemical Engineering Journal,2025, 503, 15824824

• The influence mechanism of ink viscosity on ink transfer rates and film defects of the roll-to-roll printed organic photoactive layers

  Yuanqi Liu, Zhenguo Wang, Yaqin Pan, Tianyu Liu, Yabin Zhang, Qing Zhang, Lixin Mo*,Qun Luo* and Changqi Ma

  Sci China Mater 2024, 67(8): 2600–261006

• Self-Assembled Benzotriazole Interlayer Stabilizes ZnO/Polymer Interfaces Enables Thermally Robust Organic Solar Cells

  Qian Xi, Jiajun Hong, Jian Qin, Muhammad Jawad, Na Wu, Oskar J. Sandberg, Rong Huang, Zhiyun Li, Ronald O?sterbacka, and Chang-Qi Ma*

  ACS Appl. Mater. Interfaces 2025, 17, 66673-6668225

• Profile improvement of blade coated circuits by the capillary force originating from the hydrophobic sidewalls

  Cheng Tang, Rui Liu*, Shanyou Zhu, Subin Jiang*, Ke Shui, Jian Lin* and Chang-Qi Ma*

  Flex. Print. Electron. 9 (2024) 03500907

• The Elastic Microstructures of Inkjet Printed Polydimethylsiloxane as the Patterned Dielectric Layer for Pressure Sensors.

  Peng, Yongyi;Xiao, Shugang;Yang, Junliang;Lin, Jian*;Yuan, Wei;Gu, Weibing;Wu, Xinzhou;Cui, Zheng.

• Polymerized-ionic-liquid-based solid polymer electrolyte for ultra-stable lithium metal batteries enabled by structural design of monomer and crosslinked 3D network

  Lingwang Liu, Jiangyan Xue, Yiwen Gao, Shiqi Zhang , Haiyang Zhang ,Keyang Peng, Xin Zhang , Suwan Lu, Shixiao Weng , Haifeng Tu , Yang Liu ,Zhicheng Wang , Fengrui Zhang , Daosong Fu , Jingjing Xu f,*, Qun Luo,**,Xiaodong Wu

  Materials Reports: Energy 2025,5,100311 26

• Correlating the Photovoltaic Performance and Stability of the All-Small-Molecule Organic Solar Cells to Their Intermixed Phases Determined by Concentration-Dependent Ultraviolet–Visible Absorption Spectroscopy.

  Fan Xie, Jin Fang,* Lili Zhang, Dan Deng, Yiyao Chen, Zhixiang Wei, Fengqi Guo,* and Chang-Qi Ma*

  ACS Appl. Mater. Interfaces 2024, 16, 11767-1177708

• ZnO Surface Passivation with Glucose Enables Simultaneously Improving Efficiency and Stability of Inverted Polymer:Non-fullerene Solar Cells

  Bo-Wen Liua,b, Ze-Rui Lib, Ling-Peng Yanb,Jing-Bo Guob, Qun Luoa,b, and Chang-Qi Maa,b*

  Chinese J. Polym. Sci. 2022, 40, 1594–160306

• Revealing aggregation of non-fullerene acceptors in intermixed phase by ultraviolet-visible absorption spectroscopy

  Jin Fang,1,* Zhen Wang,2 Yiyao Chen,3 Qing Zhang,3 Jianqi Zhang,4 Lingyun Zhu,4 Maojie Zhang,5 Zheng Cui,1 Zhixiang Wei,4,* Harald Ade,2,* and Chang-Qi Ma1,6,*

  Cell Reports Physical Science 3, 100983, July 20, 202207

• Non-fused molecular photovoltaic acceptor with a planar core structure enabled by bulky and embracing-type side chains

  Zhong-Xin Xue,a Jin Fang,*b Jia Li,c Di Zhang,a Zi-Wen Xu,a Li-Na Liu,ad Jianhua Yao,*cd Chang-Qi Ma b and Wei-Shi Li *ad

  J. Mater. Chem. C, 2022, 10, 2945–294908

• Boosting Perovskite Solar Cells Efficiency and Stability: Interfacial Passivation of Crosslinked Fullerene Eliminates the “Burn-in” Decay

  Changzeng Ding, Li Yin, Jinlong Wang, Valentina Larini, Lianping Zhang, Rong Huang, Mathias Nyman, Liyi Zhao, Chun Zhao, Weishi Li, Qun Luo, Yanbin Shen, Ronald ?sterbacka, Giulia Grancini,* and Chang-Qi Ma*

  Adv. Mater. 2022, 220765609

• Functionalized-MXene-nanosheet-doped tin oxide enhances the electrical properties in perovskite solar cells

  Li Yin,1,5 Chenguang Liu,4 Changzeng Ding,2,3 Chun Zhao,1,5,7,* Ivona Z. Mitrovic,5 Eng Gee Lim,1 Haibin Wang,1 Yi Sun,1,5 Yunfei Han,2,3 Zerui Li,2,3 Li Yang,6 Chang-Qi Ma,2,3,* and Cezhou Zhao1

  Cell Reports Physical Science 3, 100905, June 15, 202210

• Thermoplastic elastomer enhanced interface adhesion and bending durability for flexible organic solar cells

  Zihan Xu1,2,3, Yunfei Han1,2,3, Yuanyuan Bai3, Xingze Chen2,3, Jingbo Guo2,3, Lianping Zhang2,3, Chao Gong2,3, Qun Luo1,2,3?,Ting Zhang1,3? and Chang-Qi Ma1,2,3?

  npj Flexible Electronics (2022) 5611

• Recent progress in organic solar cells (Part II device engineering)

  Yahui Liu1, Bowen Liu2, Chang-Qi Ma2*, Fei Huang3, Guitao Feng4, Hongzheng Chen5,Jianhui Hou6, Lingpeng Yan2, Qingya Wei7, Qun Luo2*, Qinye Bao8*, Wei Ma9*, Wei Liu7,Weiwei Li4, Xiangjian Wan10, Xiaotian Hu11*, Yanchun Han12*, Yaowen Li13*, Yinhua Zhou14*,Yingping Zou7, Yiwang Chen11*, Yuqiang Liu1*, Lei Meng6*, Yongfang Li6,13*,Yongsheng Chen10, Zheng Tang15*, Zhicheng Hu3, Zhi-Guo Zhang16 & Zhishan Bo1*

  Sci China Chem12